Precautions when using pliers

①Use the pliers with the right hand. Turn the jaws to the inside, which is convenient to control the cutting part of the pliers. Use the little finger to extend between the two pliers handles to press the pliers handles, and open the pliers head, so that the pliers handles can be separated flexibly.

②The knife edge of the pliers can be used to cut the rubber or plastic insulating layer of the flexible wire.

③The blade of the pliers can also be used to cut and cut wires and iron wires. When cutting No. 8 galvanized iron wire, use the blade to cut back and forth around the surface a few times, and then just pull it gently and the wire will break.

④The guillotine can also be used to cut hard metal wires such as wires and steel wires.

⑤ The insulating plastic tube of the pliers has a withstand voltage of more than 500V, and with it, the wire can be cut with electricity. Do not throw it around during use, so as not to damage the insulating plastic tube.

⑥ Do not use pliers as a hammer.

⑦Do not use pliers to cut the double-strand live wire, it will short-circuit.

⑧ When using pliers to wrap the hoop to fix the cable, clamp the wire between the teeth of the pliers and wrap it in a clockwise direction.

⑨ It is mainly used to cut single-strand and multi-strand wires with thin wire diameters, bend the joints of single-strand wires, strip plastic insulation layers, etc.